How to Install TWRP Recovery Using Odin On Samsung Galaxy| TWRP Recovery...

How to Install TWRP Recovery Using Odin On Samsung Galaxy| TWRP Recovery Img Install In Samsung

Pre-Requirem

Steps to follow for installing TWRP recovery:ents:

1. Make sure your device has more than 50% of juice

2. Download and Install the samsung USB drivers OR Just Install the Kies

3. Downlaod the TWRP recovery file (.tar.md5) according to your device model

4. ODIN flashing tool

********************************
Blog website link: https://goo.gl/k2hfSA

*********************************


Downloads:


ODIN flashing tool : http://adf.ly/1ntsCM

Download USB drivers: http://adf.ly/1ntsE6

Downlaod TWRP: http://adf.ly/1ntsF1


1. Unzip the ODIN flashing tool and run odin.exe file.
2. (If possible) Enable OEM unlock

a) Go to Settings » About phone » and tap Build number seven times to enable Developer options.

b) Go back to main Settings page, scroll to bottom and select Developer options from there.

c) Under Developer options, look for Enable OEM unlock checkbox/toggle and enable it.

3. Turn on your samsung device into downloading mode.

a) Switch off your device.

b) Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.

c) Press Volume Up on the warning screen to accept it and boot into Download mode.

4. Now connect your phone with PC through USB cable.The Odin window on PC should detect the device and show an “Added!!” message.

5. Now click the AP button and select the TWRP recovery file that you downloaded.
6. Click on start button on ODIN and wait to finish the process. This will take small amount of time to install TWRP recovery

7. A successful Odin flash is indicated by PASS! or RESET! message on Odin and then You have successfully install the samsung custom recovery and your device will restart immediately after the process is completed.

After successfully install Now its time to check "custom recovery is installed or not"

Switch off your device.

Press and hold “Home + Power + Volume Up” buttons for a few seconds and as soon as you see your device’ logo on-screen, release three buttons altogether. Your device will boot into TWRP recovery.