Hey Rm-ITvision Lover, Today I'll Show you How to install TP-Link wireless router to work with a DSL Modem "PPPoE"? Or How To Configure TP-Link Wireless Router To Work with a DSL Modem "PPPoE"| Router Configure Bangla . This is a Bangla Tutorial about How To Configure TP-Link Wireless Router To Work with a DSL Modem "PPPoE"| Router Configure Bangla.
Advanced Preparations:
1.Turn off your modem, router and computer.
2.Connect your modem to the WAN port of the TP-Link router via an Ethernet cable; connect a computer to TP-Link router’s LAN port via an Ethernet cable.
3.Power on your router and computer first and then modem.
Step 1
Next, open the Web Browser "Firefox, Internet Explorer etc" and type the Default IP address of the router "192.168.1.1 or 192.168.0.1" in the address bar. OR
Log into the router’s web-based management page
To log into the router’s web-based management page, please refer to: www.tplinkwifi.net
1. It will ask for Router's default “Username” and “Password”. Please provide Username as “admin” and Password as “admin”.
2. After providing username and password, Click on “OK” button Next, Router configuration page will be displayed.
Step 2
Now, click on "Network" option from menu on left. Then choose "pppoe/russia pppoe" from wan connection type. Then Type your username and password as provided by WorldLink
Or Follow this method:
Configure WAN Connection Type
On the router’s management page, click Network - WAN on the left of the web page:
Change the WAN Connection Type to PPPoE.
Step 3
Enter your PPPoE username and password which are provided by your ISP.
Or
Select the "Wireless Security" option from menu on left. Choose WPA/WPA2 -personal "recommended". Type your desired password. Click Save.
Step 4
Click Save to save your settings, then the router will connect to Internet after a while.
Step 5
Wait for a few minutes and check the WAN part on the Status page, if it shows any IP address "similar as below" , that means the connection between the Router and the Modem is established.
Step 6
If there is not wan IP address and no internet access, please do a Power Cycle as the below:
1. Turn the DSL modem off first, then turn your router and computer off, and leave them off for about 2 minutes;
2. Turn the DSL modem on first, wait till the modem gets ready, then turn the router and your computer back on.
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
***********************************************************
Blog: httpa://rmitvision.blogspot.com
Twitter: https://twitter.com/Audreywclay
Facebook Profile: https://www.facebook.com/reaj.morshed1
Facebook Page: https://www.facebook.com/rmitvision/
Facebook Group: https://www.facebook.com/groups/RmITvision/?
***************************************************************
If You Like This Video Please SUBSCRIBE my Channel.
Thanks For Watching.....
*************************************************************
How To Configure TP-Link Wireless Router,TP-Link Wireless Router,Configure TP-Link,Configure TP-Link 2017,Configure TP-Link Wireless Router,How To Configure TP-Link,How To Configure TP Link,How To Configure TPLink,How To Install TP-Link,How To Install TP-Link Router,How To Install TP Link Wireless Router,Router Configure Bangla,TP LINK Router Configure Bangla,TP-LINK Router Cnfig Bangla,DSL Modem PPPoE Configure TP LINK,Configure TP Link Router,Configure TP Link
Watch Again And Share With Your Friends
https://youtu.be/QTxFU0zWg3o
Beaver says I also have such interest, you can read my profile here: long range wireless router
ReplyDeleteThank you very much, I read your blog and its very much supportive for beginners ,if you want more information please visit on Tp link router setup.
ReplyDelete